Click here to enter for a chance to win a Passport Safe. Each Passport Safe includes four Removable Insert Boxes. The two centre Insert Boxes have a cut out that is half the height and width of each. This allows up to three Passports and/or a few CD's / DVD's of backed up data to be secured on top and the bottom half of both can be used to secure jewellery, cash, spare keys or other small valuables. These and other items can also be secured in the Insert Boxes at either end. To secure Birth Certificates, Insurance Policies and other documents, remove the first three Insert Boxes, place the documents in the Safe Box then, replace the Insert Boxes. NB: Up to 12 thicknesses of standard 80 gram paper can be placed under the Insert Boxes.
Recommended
Security Products
Click link or picture
to visit Web Site.
Open in new window.
Wheel Clamp
Stop thieves stealing your towable Vehicle.
Designed to fit all diameter and width wheels from a Wheel on a Jet Ski Trailer up to a Wheel on a 4WD Camper Trailer. How innovative is that...
Other
Wheel Clamp
Web Sites
Padlock Protection
Unique Impenetrable
Security System
Designed to replace
a Padlock and
Mild Steel Chain.
Don't wait until your possessions are stolen.
High Tensile Chain
10mm diameter
High Tensile Chain Quotation / Enquiry Form
| Cannot be cut with a: |
 |
Standard Bolt Cutter |
|
Hack Saw |
|
or any other non powered hand-held metal cutting tool. |
Padlock Protector
Patented
Steel Shroud
STOPS the three methods 99.9% of all thieves use to break a Padlock or Mild Steel Chain, they are:
|
Leverage |
|
Hammer |
|
Bolt Cutter Attack |
Docking Station Installation Information
Due to public liability and general insurance reasons we cannot state exactly how to install a Passport Safe Docking Station into any surface.
| But what we can do is list ways the Passport Safe Docking Station has been previously installed in various locations by us and purchasers throughout Australia and world-wide. This allows the purchaser to make the final decision about how their Passport Safe Docking Station is installed. |
Docking Station
top view. |
NB: As the Passport Safe Docking Station can be installed to many different surfaces the following covers most known surfaces.
Important Notice Disclaimer
It is the purchaser responsibility
to make the final decision how their
Passport Safe is installed. |
Docking Station
Fastener types to install
a Docking Station.
Click to enlarge. |
The Passport Safe Docking Station can be installed to almost any flat surface and at any angle, even upside down. The Docking Station has pre-drilled holes in it and we recommend what ever type of fastener you decide to use to install the Docking Station you place a fastener in the 10 pre-drilled holes to install it, 5 along each side of the Docking Station.
The picture to your left shows various fastener types that can be used depending on what the Docking Station is being installed to. |
mk3 Docking Station
| The mk3 Docking Station is made from two Docking Stations joined together in the centre. When installed correctly the mk3 Docking Station is kept rigid by what it is affixed to eg. Brick, Concrete or Wood Wall or Floor, Vehicle Fixing Kit Steel Bracket, Marine Ply, 6mm Ply / Craft Wood, 3mm Steel Plate and other surfaces not mentioned. |
mk3 Docking Station top view, will secure two Passport Safes. |
We suggest what ever fastener type you decide to use to install the mk3 Docking Station, you place a fastener in the 5 pre-drilled holes on both sides of each Docking Station used to make the mk3 Docking Station.
NB: That suggests we recommend placing your chosen fastener type in 20 pre-drilled holes to install a mk3 Docking Station.
Fixing Holes In The Docking Station Not Big Enough
If the pre-drilled fixing holes in the Docking Station are not large enough for your selected fastener type eg. screws / bolts etc. it is ok to enlarge the holes by using a high speed steel drill, the same diameter as the fastener.
This ensures, if a thief did find your Passport Safe it would be practically impossible to prize it away from the surface it is installed to eg. Brick, Concrete, Wood Wall or Floor, to the floor in a Caravan or Motor Home and any other surface not mentioned.
Since 1993, when the Safes were first sold,
we are not aware of a single installed
Passport Safe ever being stolen. |
Fastener Types Used To Install The Docking Station
The following are suggestions about the fastener types that can be used to install the Passport Safe Docking Station onto common known surfaces.
Wood including Marine Ply or other Wood Composite Products
 |
Coach Bolts, Coach Screws, Type 17 Tek Screws or a minimum 8 gauge full thread Wood screws, as long as possible. NB: Make suitable allowance for the thickness of the attaching medium when deciding on the fastener length. |
Acrylic water based glue
and its applicator. |
|
Acrylic glue (Fuller Max Bond Construction Adhesive. Fast Grip 420g, must be Acrylic, water based) plus the fastener type mentioned above. |
Steel
|
Coach Bolts, Coach Screws, special one way Security Screws, Tek Screws, large diameter Steel Pop Rivets, Self Tapers / Metal Thread Screws. |
|
Acrylic glue (Fuller Max Bond Construction Adhesive. Fast Grip 420g, must be Acrylic, water based) plus the fastener type mentioned above. |
Marble - generally under a kitchen bench top.
|
Acrylic glue (Fuller Max Bond Construction Adhesive. Fast Grip 420g, must be Acrylic, water based) may be used, however we highly recommend you contact your kitchen manufacturer for their recommendation. |
Brick or Concrete
|
Specific heavy duty masonry fixings. |
|
Loxins as the bolt head stays a consistent height as the nut is tightened. |
|
Acrylic glue (Fuller Max Bond Construction Adhesive. Fast Grip 420g, must be Acrylic, water based) plus the fastener type mentioned above. |
NB: Plastic Raw Plugs or similar
ARE NOT TO BE USED
under any circumstance. |
Acrylic Glue
It is important to note if you every intend moving the Docking Station to another location we suggest you DO NOT use Acrylic glue. Using Acrylic glue is for the permanent fixing of a Docking Station.
Security product web sites you may be interest in.
What To Do Next...
 |
Go to Price List / Secure Order Form for a complete price list of all our products and accessories and to place your order. |
|
OR - Do you require a quotation and / or information sent to you? Go to Enquiry / Quotation Form. |
|
OR - For further information about the Passport Safe please contact us. |
|
OR - Keep reading through this Web Site to learn why you need to purchase the World's only Relocatable, High Security, Light-Weight, Australian designed, manufactured and very cost effective Passport Safe. |
Purchase the Passport Safe to secure your Passport, Birth Certificate and other documents that can be used to steal your identity. This will protect you from becoming a victim of Identity Thieves.
Including the above items the Passport Safe has plenty of room to secure for example, Jewellery, Cash, spare keys and other small valuables.
Do you know where your
Passport or Birth Certificate
is right now ? |
What ever you choose to do next THINK CAREFULLY!
Don't become a victim of Identity Theft...
Designed by: Internet SalesDesign, Development and Marketing Company Since 1994
Click pictures to
enlarge and
read description.
Passport Safe slid part way into a Docking Station.
